Rear Brake

A lot of work done over the last few days, rear braided brake line made, fitted and brake bled. 

Rear Brake Caliper

Finally finished the rear brake caliper bracket.
I an using a Honda Varadero 125 Rear wheel
so the bracket and caliper are matching.
There is an extra wedge shape welded to the
bottom to match up with the Yamaha YZF-R125
swingarm.

Rounded top

In an effort to complete the assembly of the right hand hanger I made a master cylinder plunger/piston from a plain bolt. I cut the head off and used a dremel to round the top. I applied red rubber grease to the contact point on the master cylinder. This is a stop gap until I happen across the original plunger.