Tuesday, 24 April 2012

Rad & Fab

Cleaned and sprayed the radiator which was in pretty good condition. just a lot of corrosion. So the cooling system is ready to go all the pipes and expansion tank are connected up.

























The original rear footrest hangers also included the exhaust hanger on the left hand side. I am not refitting these so instead I fabricated a hanger bracket for the exhaust  from an aluminium off cut which is 3mm thick and very inexpensive and easy to polish!


























Posted by aol at 14:58
Labels: , , ,

2 comments:

  1. Me21 May 2012 at 17:37

    "I also need to find a home for two alternator earth cables, in the workshop manual it says to bolt them to the engine and shows a small image of the location but it does not correspond to this engine?"

    http://i183.photobucket.com/albums/x151/GaryHope/Aprilia%20RS125/RS125%20Rebuild/IMG_7018.jpg

    I think this is what you need if you've not already sorted it.

    ReplyDelete
  2. aol22 May 2012 at 01:20

    excellent - thanks for that!

    ReplyDelete

Subscribe to: Post Comments (Atom)