R Caliper rebuild

After an initial coat of primer, 3 coats of red and 3 coats of clear lacquer the rebuild of the rear caliper is finished. New seals and pads are added after a full clean out of the internals and pistons.
The mounting bracket has also been cleaned up, polished and coated with ACF50. The bolts, washers and lock nut have also been replaced with Stainless Steel units. The threads have been coated with CRC SP400 corosion inhibitor and finally torqued ready to go.

Here is a quick link back to the original state of the Caliper >
http://2strokelover.blogspot.com/2012/01/rear-caliper.html